gasketing sealant -凯发备用

mxbon gasket sealant is an instanly forming anaerobic-type flat sealing agent, suitable for various sizes of flang surfaces. it replaces traditional gaskets, thereby reducing inventory costs. its features encompass a solvent-free composition, high viscosity, pressure resistance, and ease of use. comparaed to pre-cut gaskets, its advantages lie in process simplification, reduced defect rates, minimized production chaos, and compatibility with various adhesive methods.

this sealant comopletely fills the contact surface, preventing leaks and corrosion while reamining unaffacted by deformation abd fatigue-related leakage issues. furthermore, it eliminates the need to consider gasket thickness, evenly distributing flang pressures, decreasing deformation probabilities, and enhancing surface machining precision. its broad applicability contributed to lower inventory costs for gaskets of varying sizes.

usage

  • clean flange surfaces before application.
  • apply sealant continuously around bolt holes.
  • apply sufficient torque to prevent flange displacement.
  • do not use anaerobic gasket sealant as filler.
  • enhance traditional gaskets by overlaying with anaerobic gasket sealant.

perfect seals every time: mxbon gasketing sealant

characteristics

  • 14510

    anaerobic, heat resistance

    resistant to high temperatures up to 204°c, excellent solvent and chemical resistance.

    applicable to rigid castings, milling surfaces, with a maximum fill gap of 0.25mm.

    will not tear or age.

  • 14515

    anaerobic, gap-filling, general-purpose

    rapid curing, high viscosity and suitable for large gap filling.

    excellent solvent and chemical resistance, non-corrosive.

    applicable to rigid castings, stamped metal parts, with a maximum fill gap of 0.25mm.

    will not tear or age.

  • 14518

    anaerobic, gap-filling, surface insensitive

    high viscosity and suitable for large gap filling.

    excellent solvent and chemical resistance, non-corrosive.

    suitable for aluminium alloy materials, rigid castings, and stamped metal parts.

    will not tear or age.

  • 14574

    anaerobic, rapid curing

    quick curing, immediate sealing at low pressure.

    excellent solvent resistance and chemical resistance.

    applicable to rigid castings, stamped metal parts.

    will not tear or age.

technical information

item no. appearance viscosity
mpa.s
gap performance(mm) working temp.
cure speed nsf
without activator with activator without activator with activator
14510 pink 40,000-140,000
thixotropic
0.25 0.50 -54℃-204℃ 4-24hrs 30min-4hrs
14515 purple 150,000-375,000
thixotropic
0.25 1.25 -54℃-150℃ 1-12hrs 15min-2hrs
14518 red 500,000-1,000,000
thixotropic
0.25 1.25 -54℃-150℃ 4-24hrs 30min-4hrs
14574 orange 70,000-120,000
thixotropic
0.25 0.50 -54℃-150℃ 1-12hrs 15min-2hrs
contact us contact us
聯絡表單 - 英文
网站地图