structural adhesives -凯发备用

mxbon acrylic structural adhesives were formulated to provide excellent mechanical resistance, including high shear strength, peel resistance and impact resistance, especially for metal bonding applications.

usage

  • mxbon acrylic structural adhesives were formulated to provide excellent mechanical resistance, including high shear strength, peel resistance and impact resistance, especially for metal bonding applications.
  • mxbon acrylic structural adhesivea are single compound with two-steps operation.
  • pre-applied activator and no need to mix or allocate a specific ratio. quick fixture time for assembling parts at room temperature, and it provides a highly efficient, reliable and weather-resistant solution.

characteristics

  • 31324

    mid-high viscosity, single compound, anaerobic type, bigger gap bonding

    durable, impact-resistant, high-strength and chemical-resistance properties.

    with high strength and fast fixture time.

    for large gap (0.5~1mm).

    it is suitable for bonding most metals and ferrites, and can also be used on some plastic materials.

  • 31326

    mid-high viscosity, single compound, anaerobic type, fast curing on metals

    durable, impact-resistant, high-strength and chemical-resistance properties.

    with high strength and fast fixture time.

    for gaps smaller than 0.25mm. curing time within 2 minutes.

    good adhesion on different types of ferrites, such as permanent magnets, transformer cores and other applications.

  • 31330

    high viscosity, single compound, especially for metal mechanical stress

    especially for the flat metal surface bonding usage. using it with activator is required.

    it can fill the gaps, and provide good vibration and impact resistance after fully cured.

    for bonding different metal substrates, including metal, ferrite and other motor components, it is a best metal bonding solution with the highest strength requirements.

  • 31332

    gel type, single compound, for high temperature usage

    low fluidity, for vertical surface, it can fill gaps. after curing, it provides excellent vibration and impact resistance.

    it can be cured by heating it above 130°c.

    high temperature resistance of 205°c, it is suitable for bonding motor components such as metals or ferrites that come with high working temperatures.

technical information

item no. appearance bonding
substrates
viscosity
mpa.s(cp)
gap
performance
shear
strength
n/mm2
working
temp.
°c
other
curing factor
activator
plastic glass metal setting time/
fully cured
heat cure
31324 amber liquid 10,000-24,000 0.5~1mm
5min./24hrs
15-21 -55~150 037387
31326 amber liquid 11,000-25,000 0.25mm
2min./24hrs
≥15 -55~125 017649
31330 opaque white
to light yellow liquid
45,000-90,000 0.5mm
5min./24hrs
15-30 -55~125 037387
31332 opaque white
to light yellow liquid
75,000-130,000 0.5mm
5min./24hrs
≥11 -55~200 20min.@130°c
10min.@150°c
037387
contact us contact us
聯絡表單 - 英文
网站地图